Wet Polishing Pad

Официальный форум AGM X2.
Обсуждения, критика, предложения, обзоры и решения проблем.
Ответить
lili038
Сообщения: 10
Зарегистрирован: 10 апр 2019, 03:46

Wet Polishing Pad

Сообщение lili038 » 10 апр 2019, 03:55

Flexible Polishing Pad
Application:accurate polishing and buff for edge,inner arc and plane surface of granite,marble etc stone.
Our Advantages
1. Perfect quality:Without color faded,high quality resin and mature sintered technology make they not fade color.
2. Stable Grit:Strict diamond model selection technology to make sure our each grit is stable and not bunched.
3. High polishing speed:Better polishing and speed with special formula.
1. Diamond polishing pads for polishing stone and concrete
2. Grit Number: 50#,100#,200#,400#,800#,1500#,3000#
3. You can substitute any grit ... Please send a change of order message after buying if you would like to request different grits.
Instructions
1. Ware an apron,a gauze mask and safety glasses first.
2. Connect a back holder to the polisher or angle grinder and attach a wet pad of grit 50 to the back holder.
3. Set the speed at 3,000-4,000RPM and start polishing process.
4. Moving two passes across and one pass up and down is a good technique.Make sure all prior using all prior scratches are removed before moving onto the next grit.
5. Repeat the same process using all 7 pads to complete the polishing process.Polish from grit 50 to grit 3000 respectively.Do not skip.
6. If you want to achieve the best polishing results on granite or other natural stones,use Buff pad as the last step.Wet the work piece and run the Buff pad semi-wet with very low water.When the water is consumed,the process is complete.Repeat as necessary to improve the luster and achieve the mirror effect result.
7. Dry pads are designed for use on jobs without using water,but polishing with a small amount of water to wet the object surface will ultimately reach a better result.Wet Polishing Pad
website:http://www.tl-diamondtools.com/wet-polishing-pad/

Ответить